Yamaha MBK XMAX 2014 Service Manual page 274

Sheave holder
90890-01701
Primary clutch holder
YS-01880-A
4. Install:
• V-belt "1"
• Primary fixed sheave "2"
• Washer
• Primary sheave nut "3"
ECA2DL1004
NOTICE
Do not allow grease to contact the primary
sheave assembly.
TIP
Install the V-belt in the primary sheave (when the
pulley is at its widest position) and in the second-
ary sheave (when the pulley is at its narrowest
position), and make sure the V-belt is tight.
5. Tighten:
• Primary sheave nut "1"
Primary sheave nut
80 Nm (8.0 m·kgf, 58 ft·lbf)
TIP
While holding the primary fixed sheave with the
rotor holding tool "2", tighten the primary sheave
nut.
V-BELT AUTOMATIC TRANSMISSION
6. Install:
• V-belt case
TIP
• Make sure that the V-belt case gasket lip fits
properly around the V-belt case.
• Tighten the V-belt case bolts in stages and in a
crisscross pattern.
5-39
Rotor holding tool
90890-01235
Universal magneto and rotor
holder
YU-01235