Installing The Throttle Body; Checking The Throttle Position Sensor; Checking The Isc (Idle Speed Control) Unit - Yamaha MBK XMAX 2014 Service Manual

ECA2DL1001
NOTICE
When installing the fuel hose, make sure that
it is securely connected, and that the fuel
hose connector cover is in the correct posi-
tion, otherwise the fuel hose will not be prop-
erly installed.
TIP
• Wipe up any fuel remaining in the recess "a" in
the fuel pump with a dry rag "1".
• After installing the fuel hose connector cover
"2", make sure that it is installed securely.
EAS2DL1004

INSTALLING THE THROTTLE BODY

1. Install:
• Throttle body
TIP
Align the projection "a" on the throttle body with
the slot "b" in the throttle body joint.
b
1
a
2
a
EAS2DL1005
CHECKING THE THROTTLE POSITION
SENSOR
1. Check:
• Throttle position sensor
Refer to "CHECKING THE THROTTLE PO-
SITION SENSOR" on page 8-147.
EAS2DL1006
CHECKING THE ISC (IDLE SPEED
CONTROL) UNIT
1. Check:
• ISC (idle speed control) unit
Refer to "CHECKING THE ISC (IDLE
SPEED CONTROL) UNIT" on page 8-150.
7-7
THROTTLE BODY