Yamaha MBK XMAX 2014 Service Manual page 210

5. Removing the protective cap "1", and then
connect the Yamaha diagnostic tool to the
ABS test coupler (4P).
Yamaha diagnostic tool
90890-03215
6. Start the Yamaha diagnostic tool and display
the diagnosis mode screen.
7. Select code No. 1, "ABS reaction-force con-
firmation".
8. Click "Action" "1", and then operate the front
brake lever "2" and rear brake lever "3" simul-
taneously.
TIP
• The hydraulic unit operates 1 second after the
front brake lever and rear brake lever are oper-
ated simultaneously and continues for approx-
imately 5 seconds.
• The operation of the hydraulic unit can be con-
firmed using the indicator.
On: The hydraulic unit is operating.
Flashing: The conditions for operating the hy-
draulic unit have not been met.
Off: The front brake lever and rear brake lever
are not being operated.
ABS (ANTI-LOCK BRAKE SYSTEM) (for YP250RA)
1
9. A reaction-force pulsating action is generated
in the front brake lever "1" and continues for a
few seconds.
TIP
• The reaction-force pulsating action consists of
quick pulses.
• Be sure to continue operating the front brake
lever and rear brake lever even after the pul-
sating action has stopped.
• "ON" and "OFF" on the tool screen indicate
when the brakes are being applied and re-
leased respectively.
1
10.After the pulsating action has stopped in the
front brake lever, it is generated in the rear
brake lever "1" and continues for a few sec-
onds.
TIP
• The reaction-force pulsating action consists of
quick pulses.
• Be sure to continue operating the front brake
lever and rear brake lever even after the pul-
sating action has stopped.
4-67
1
2
3