Fault code
No.
33
Hydraulic unit assembly
(abnormal ABS motor
power supply)
34
Hydraulic unit assembly
(short circuit in ABS motor
power supply circuit)
41
Front wheel ABS (intermit-
tent wheel speed pulses
or incorrect depressuriza-
tion)
42
Rear wheel ABS (intermit-
47
tent wheel speed pulses
or incorrect depressuriza-
tion)
43
Front wheel sensor (miss-
ing pulses)
ABS (ANTI-LOCK BRAKE SYSTEM) (for YP250RA)
Item
Symptom
Power is not supplied to
the motor circuit in the hy-
draulic unit assembly.
Short circuit is detected in
the motor power supply
circuit in the hydraulic unit
assembly.
• Pulses from the front
wheel sensor are re-
ceived intermittently
while the vehicle is trav-
eling.
• Front wheel will not re-
cover from the locking
tendency even though
the signal is transmitted
from the ABS ECU to re-
duce the hydraulic pres-
sure.
• Pulses from the rear
wheel sensor are re-
ceived intermittently
while the vehicle is trav-
eling. (For fault code No.
42)
• Rear wheel will not re-
cover from the locking
tendency even though
the signal is transmitted
from the ABS ECU to re-
duce the hydraulic pres-
sure.
Front wheel sensor signal
is not received properly.
(Missing pulses are de-
tected in the signal while
the vehicle is traveling.)
8-105
Check point
• Blown ABS motor fuse
• Defective coupler be-
tween the battery and
the hydraulic unit assem-
bly
• Open or short circuit in
the wire harness be-
tween the battery and
the hydraulic unit assem-
bly
• Defective hydraulic unit
assembly
• Defective hydraulic unit
assembly
• Incorrect installation of
the front wheel sensor
• Incorrect rotation of the
front wheel
• Front brake dragging
• Defective hydraulic unit
assembly
• Incorrect installation of
the rear wheel sensor
(for fault code No. 42)
• Incorrect rotation of the
rear wheel
• Rear brake dragging
• Defective hydraulic unit
assembly
• Foreign material ad-
hered around the front
wheel sensor
• Incorrect installation of
the front wheel
• Defective sensor rotor or
incorrect installation of
the rotor
• Defective front wheel
sensor or incorrect in-
stallation of the sensor