ADJ PAR Z120 RGBW User Manual page 12

SYSTEM MENU
Dimmer Mode – This will let you select your desired dimmer curve.
Press the MENU button until
displayed. "STDA" (standard), "STGE" (stage), "TV" (TV), "ARAL" (Architectural), "THAL" (Theatre) or
"STG2" (stage2). See the dimmer curve chart on page 17 for more info.
Press the UP or DOWN buttons to find your desired dimmer curve and press
exit or exit menu mode without any change after 8 seconds automatically.
White Balance - Calibration
Press the MENU button until
to select Red, Green or Blue. You can also choose values between 125‐255. Once selected, press
ENTER to confirm and exit, or exit menu mode without any change after 8 seconds automatically.
Manual mode
Press the MENU button until
to select the Red
/Dimmer
and exit, or exit menu mode without any change after 8 seconds automatically.
Color Macros
Press the MENU button until
to select the Color Macros 1‐64 or OFF. Press ENTER to confirm and exit, or exit menu mode without
any change after 8 seconds automatically.
is displayed, and press ENTER. 1 of 6 dimmer curves will be
is displayed and press
is displayed and press
/Green
or Strobe
is displayed and press ENTER. Use the DOWN and UP button
12
ENTER to confirm and
ENTER. Use the DOWN and UP button
ENTER. Use the DOWN and UP buttons
/Blue
. Press ENTER to confirm
/White