Huawei SmartLi-ESM-24020P1 Quick Manual page 43

SmartLi-ESM-24020P1
Quick Guide
Figure 1-49 Connecting power cables between a battery module and the UPS
Step 4 If there are multiple battery modules cascaded in a string, insert the cable
terminal into the lower port of a battery module, and then insert the cable
terminal into the upper port of the next battery module.
Figure 1-50 Connecting power cables between battery modules in a positive or
negative string
----End
Issue 03 (2022-12-30)
NO TE
● It is recommended that switches be installed for battery cables. Customers need to
purchase switches by themselves.
● For the connection between a battery module and a UPS2000-G-15/20KRTL-01, the
recommended rated current of the switch is 63 A.
Copyright © Huawei Digital Power Technologies Co., Ltd.
1 Installation and Cable Connection
37