Huawei SmartLi-ESM-24020P1 Quick Manual page 20

Table of Contents

SmartLi-ESM-24020P1

Quick Guide

Figure 1-11 Inserting the module

Step 7 When the outer handle is about to enter the door beam, assign the two persons

to release the outer handle, fasten the outer handle properly, and hold the side

bottom of the battery module to continue to insert the module slowly.

Figure 1-12 Continuing to insert the module

Step 8 Insert the module into the cabinet using the mounting ears on both sides. After

the module is in position, attach the mounting ears closely to the door beam, and

tighten the screws.

Figure 1-13 Attaching the mounting ears closely to the door beam

Step 9 If multiple battery modules need to be installed, perform

sequence, and install a filler panel between battery modules at the upper and

lower layers.

Issue 03 (2022-12-30)

1 Installation and Cable Connection

Step 1–Step 8

Table of Contents