Brita sodaTRIO Usage Instructions page 7

To enjoy an even better sparkling water experience, fill the bottles with fridge-chilled,
filtered water from a BRITA water filter jug.
In case of using the sodaTRIO glass bottle,
the plastic or big stainless steel bottle: put
the filled bottle into the container. In case
of using the sodaTRIO small stainless steel
bottle: first put the bottle base into the
container, after that put the filled bottle into
the container.
Carefully thread the container with the
filled bottle into the soda maker. Make
sure, that the nozzle is centrally positioned
in the bottle opening. After that, carefully
screw in the container into the system in
counterclockwise direction according to the
marked symbols. You will hear an acoustic
feedback, when it is completely screwed in.
Press the sparkling button all the way
down. After 2-3 seconds you will hear a
clear buzzing sound.
Release the sparkling button to allow the
excess pressure to escape.
Carefully unscrew the container from the
soda maker in clockwise direction, take
out the bottle and enjoy your freshly
carbonated water.
Individually-adjusted fizziness
With the sodaTRIO, you can individually adjust the fizziness of your water:
• A short press of the sparkling button (approx. 1 second) will give you slightly fizzy water.
• For medium fizziness, press the button down for approx. 2 seconds.
• For extra-fizzy water, keep the sparkling button pressed down until you can hear a clear
buzzing sound (approx. 3 seconds).
By repeating this procedure you can add even more fizziness to your water.
1 L
0,65 L
1-2 sec.
2-3 sec.
7