Envirosight Verisight Pro+ Original Instruction Manual page 85

Information and Care
Cleaning
Ensure that the cable is thoroughly cleaned after each inspection. Use a wet rag
when winding the cable rod back onto the coiler. Ensure the connector for the
coiler is free from dirt and moisture.
Maintenance
Ensure that all screw threads and connections are free from dirt.
CAUTION!
High-pressure cleaners must not be used. It can cause
considerable damage to the coiler, camera and other system
components.
Cleaning agents or solvents must not be used. These can damage
the seals and other materials on the system.
Only clean water should be used.
Version A
Envirosight Verisight Pro +
85