Envirosight Verisight Pro+ Original Instruction Manual page 3

This document is applicable to the Verisight Pro+ Inspection System.
A standard system and available options are covered by this document. Depending
on your system configuration you may lack some of the features mentioned in
this document.
Disclaimer
Hardware and software mentioned in this document are subject to continuous
development and improvement. Consequently, there may be minor difference
between the information in the document and the performance or design of the
product. Specifications, dimensions and other statements in this document are
subject to change without prior notice.
Envirosight LLC and its suppliers shall not be liable for any damages related to
this software or hardware, or for any other damages whatsoever caused by
the use of or inability to use any Envirosight product. This is applicable even
if Envirosight has been advised of the damage risk. Under any circumstances,
Envirosight's entire liability shall be limited to replace such defective software or
hardware that was originally purchased from Envirosight.
Envirosight LLC
111 Canfield Ave., Unit B3, Randolph, NJ 07869
Phone: 866-936-8476 • 973-252-6700