Switching The Ccu Off; Environmental Operating Temperature Consideration - Envirosight Verisight Pro+ Original Instruction Manual

Switching the CCU Off

To switch the Verisight Pro+ off, press the Power ON/OFF button and a dialogue
will be displayed asking for confirmation to Power Off.
Press OK or the Carriage Return key and the unit will switch off in a controlled
fashion.
NOTE!
Under extreme circumstances, the unit may fail to turn off in this
fashion, in which case, press and hold the Power ON/OFF button .
for 10 seconds; when the power button is then released the unit
will turn off.

Environmental Operating Temperature Consideration

The operating temperature of the Verisight Pro+ is between 14° to + 104°F
(-10° to + 40°C), not in direct sunlight.
Care should be taken during the operating of the CCU, especially in hot
environments, to shade it from direct sunlight. Radiant heat from the sun can
cause the equipment to heat up to temperatures exceeding 140°F (+ 60°C).
All computers generate their own heat on top of the ambient temperature
surrounding it.
NOTE !
Using the equipment in direct sunlight can cause the electronics
to overheat and shut-down unexpectedly. The equipment will
not turn on again until it has been allowed to cool down.
30
Envirosight Verisight Pro +
Version A