Table of Contents
Advertisement
INSTALLATION
Slide the hose clamp over the aluminium flex pipe. Then
slide the flex pipe over the air intake tube of the stove. Next
tighten the hose clamp over the end of the aluminium flex
hose.
FOR USE IN MOBILE HOME/TRANSPORTABLE BUILDINGS
• WARNING! DO NOT INSTALL IN SLEEPING ROOM.
• CAUTION! THE STRUCTURAL INTEGRITY OF THE
MOBILE HOME/TRANSPORTABLE BUILDING FLOOR,
WALL, AND CEILING/ROOF MUST BE MAINTAINED.
• INSTALL IN ACCORDANCE WITH 24 CFR, PART 3280
(HUD).
• USE A FACTORY BUILT CHIMNEY THAT COMPLIES
WITH UL 103 STANDARDS; THEREFORE IT MUST BE A
TYPE HT (2100°F).
• USE A SPARK ARRESTER.
• THE STOVE MUST BE ATTACHED TO THE STRUCTURE
OF THE MOBILE HOME/TRANSPORTABLE BUILDING.
SECURING APPLIANCE'S WITH PEDESTAL TO THE
FLOOR
Manufactured or Mobile home/transportable building
installations require that a solid fuel-burning appliance be
attached to the floor of the mobile home/transportable
building. Two mounting holes are provided in the pedestal.
Access the mounting holes through the front of the unit. Use
the means necessary to attach the appliance to the floor.
In addition to the previously detailed installation requirements,
mobile home/transportable building installations must meet
the following requirements:
• The space heater is to be connected to a factory-built
chimney conforming to UL 103, Standard for 650°C
Factory-Built Chimneys.
• The heater must be permanently attached to the floor.
There are two holes in the pedestal base, use 3/8" bolts
through the floor.
• The heater must be electrically grounded to the steel
chassis of the mobile home/transportable building with
8 GA copper wire using a serrated or star washer to
penetrate paint or protective coating to ensure grounding.
• When moving your mobile home/transportable building,
all exterior venting must be removed while the mobile
home/transportable building is being relocated. After
relocation, all venting must be reinstalled and securely
fastened.
• Outside Air is mandatory for mobile home/transportable
building installation. See your dealer for purchasing.
• Check with your local building officials as other codes
may apply.
• Only use the specified components listed in this manual
for this unit. The use of components that are not meant for
this unit can cause unsafe conditions.
9
© 2023 Breckwell Hearth
Advertisement
Table of Contents
