Glass Care - Breckwell SW500 Operation Manual

Table of Contents

Advertisement

CHIMNEY MAINTENANCE

GLASS CARE

• Inspect and clean the glass regularly to detect any cracks.
If you spot one, turn the stove off immediately. Do not
abuse the glass door by striking or slamming shut. Do not
use the stove if the glass is broken.
• If the glass on your stove breaks, replace only with the
glass supplied from your heater dealer. Never substitute
other materials for the glass.
• To replace the glass, remove the screws retaining the
glass moldings inside the door. Remove the moldings and
replace the damaged piece with a new one. Perform the
procedure backward after replacing it. When replacing
the glass, you should change the glass gasket to make
sure you keep it sealed.
• Never wash the glass with a product that may scratch.
Use a specialized product, available in the stores where
wood stoves are sold. The glass should be washed only
when cold.
GASKET CARE
NEVER OPERATE THE STOVE WITHOUT A GASKET OR
WITH A BROKEN ONE. DAMAGE TO THE STOVE OR
EVEN HOUSE FIRE MAY RESULT.
This unit's door uses a 5/8" diameter rope gasket. It is
recommended that you change the door gasket (which
makes your stove door air tight) once a year, in order
to ensure good control over the combustion, maximum
efficiency and security. To change the door gasket, simply
remove the damaged one. Carefully clean the available
gasket groove, apply a high temperature silicone sold for
this purpose, and install the new gasket. You may light
up your stove again approximately 24 hours after having
completed this operation.
THIS WOOD HEATER NEEDS PERIODIC INSPECTION
AND REPAIR FOR PROPER OPERATION. IT IS AGAINST
FEDERAL REGULATIONS TO OPERATE THIS WOOD
HEATER IN A MANNER INCONSISTENT WITH OPERATING
INSTRUCTIONS IN THIS MANUAL.
17
WARNING:
ATTENTION:
© 2023 Breckwell Hearth

Advertisement

Table of Contents
loading

Table of Contents