Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
FLUE COLLAR ASSEMBLY
Mount the flue collar to the top of the unit as shown using
the (3) 5/16-18 x 1-1/2 bolts, (3) washers, and (3) weld
tabs provided in the parts box.
Step 1: Remove
5/16-18 x 1-1/2 BOLT
WASHER
DIFFUSER
Step 2: Attach
GASKET
HEATER TOP
WELD TAB
Above is an illustration of the installation of the flue collar
and diffuser. The installation of this diffuser is critical for
the proper functionality of this appliance. Failure to install
Step 3: Attach
this diffuser can result in a possible over fire situation.
This diffuser is critical to the proper functionality for the
cleanest burning fires in your stove. FAILURE TO INSTALL
THE DIFFUSER CAN RESULT IN FIRE, PROPERTY DAMAGE
AND/OR DEATH.
BLOWER ASSEMBLY (SOLD SEPARATELY)
If chosen to purchase a B36T blower assembly, refer to the
instructions included with that kit along with the below:
1.
Remove blank from back panel of the heater.
2. Attach the blower mounting bracket supplied with your
heater.
3. Attach the B36T blower assembly to the blower bracket.
6
© 2023 Breckwell Hearth
Advertisement
Table of Contents
