Component Setup; Cpu Installation; Cpu Cooler Installation - Advantech PPC-615W User Manual

2.2

Component Setup

2.2.1

CPU Installation

Remove the CPU socket cover and install the CPU.
Note!
Exercise caution when handling the motherboard CPU pins.
Refer to the datasheet when selecting the motherboard CPU.
Note! After CPU installation, ensure the CPU surface is covered in thermal
grease. (Thermal grease is included in the PPC-MB series motherboard
accessory box.)
2.2.2

CPU Cooler Installation

Using four screws, affix the cooler onto the motherboard. Then connect the cable to
the motherboard. (Refer to the datasheet when selecting the CPU cooler. The cooler
must be purchased separately.)
11 PPC-615W/618W/621W User Manual