Lga1700 12th/13th generation intel® core™ i9/i7/i5/i3 & pentium®/celeron® cpu board for ipc-2 series chassis (86 pages)
Summary of Contents for Advantech PPC-1150
Page 1
User Manual PPC-1150 Intel® ATOM™ N2600 processor based microcomputer, with 15" color TFT LCD display...
Page 2
No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
Page 3
Technical Support and Assistance Visit the Advantech web site at http://support.advantech.com where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance.
Page 4
The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.
Page 5
Don't touch any components on the CPU card or other cards while the PC is on. Disconnect power before making any configuration changes. The sudden rush of power as you connect a jumper or install a card may damage sensitive elec- tronic components. PPC-1150 User Manual...
Chapter General Information This chapter gives background information on the PPC-1150 panel PC. Sections include: Introduction Specifications Dimensions...
Introduction The PPC-1150 is an Intel Atom N2600 based Panel PC with a 15" color TFT LCD, which can be installed in versatile applications under harsh environment. The streamlined design, slim and compact chassis makes it convenient and space-sav- ing. The fanless design ensures the stable operation of PPC-1150 in any harsh industrial environment.
18 W (test system: WindowsXP32bit) 12-30 V , 5~2 A Output Voltage Note 1: PPC-1150's power test conditions are as follows: Test Software Test Configuration Memory: Transcend DDR3 1333 SODIMM 2G x 1 HDD: WD 500G WD5000BPKX 2.5" SATA Burn-in 7.0 I/O: COM Port RS232 Loopback x4, USB2.0 Device x3, USB...
Before you start to set up the panel PC, take a moment to become familiar with the locations and functions of the controls, connectors and ports. Front view: Figure 2.1 Front panel Note! There are no LED indicators on the front panel. PPC-1150 User Manual...
Page 17
Figure 2.2 Side view Items in red circles are VESA screw holes (screw specification: M4*6) Antenna hole (two) Panel Mount Bracket holes Vent hole I/O interfaces: Please refer to the figure below: COM1:RS232, COM2:RS232/422/485, COM3:RS232, COM4:RS422/485, COM5:RS232 PPC-1150 User Manual...
Plug the mSATA into the mainboard interface and secure it with two screws pro- vided in the accessary box. Figure 2.3 Install mSATA SATA HDD installation a. Take out four screws from the accessary box to fix SATA HDD to the bracket. PPC-1150 User Manual...
Connect the HDD cable and notice the wiring. Do not let the HDD cable press the data cable. Install Wireless LAN Card Insert the wireless LAN card into the mainboard interface and fix it. PPC-1150 User Manual...
Page 22
Secure the antenna as shown below (eudipleural, two places) Connect the antenna to the wireless LAN card and attach the external antenna terminals. PPC-1150 User Manual...
Connect the 3-pin male plug of the power cord to an electrical outlet. 2.5.2 Connecting Keyboard and Mouse Connect the mouse and keyboard to the USB interface of the panel PC. 2.5.3 Switching on Power Press the power switch located at the left of the I/O section. PPC-1150 User Manual...
After the panel PC is installed in the cabinet, prepare the hook. Place the hook in the hole as the picture shows to hookup the panel PC. Screw Fasten the screw to fix the panel PC. Figure 2.4 Hook Installation PPC-1150 User Manual...
ROM may not be the latest version, if needed, please find it at: http://www.advantech.com/ BIOS Setup 4.2.1 Enter BIOS Start the computer and press “Delete” key to enter BIOS. Press “F4” to save and exit after any configuration, or the configuration won't be saved in BIOS. PPC-1150 User Manual...
There are 6 options under “Brightness Manual Control”. 4.2.3 COM2 Mode Selection (RS232/RS422/RS485) Select “Super IO Configuration” under “Advanced”. PPC-1150 User Manual...
Select “Serial Port 2 Configuration” and then select the operation mode of COM2 by "Serial Port2 Mode". 4.2.4 COM4 Mode Selection (RS422/RS485) Select “Super IO Configuration” under “Advanced”. PPC-1150 User Manual...
Page 34
Select “Serial Port 4 Configuration” and then select the operation mode of COM4 by "Serial Port4 Mode". PPC-1150 User Manual...