ASROCK Rack EP2C612D24 Quick Installation Manual

*15G065047100AK*
P/N: 15G065047100AK V1.0
Quick Installation Guide
EP2C612D24 / EP2C612D24-4L
The server board User's Manual is available for download from the ASRock Rack's official website
at http://www.asrockrack.com.
Take note of the following precautions before you install server board components or change any
server board settings.
1. Unplug the power cord from the wall socket before touching any components.
2. To avoid damaging the server board's components due to static electricity, NEVER place your
server board directly on the carpet or the like. Also remember to use a grounded wrist strap or
touch a safety grounded object before you handle the components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded anti-static pad or in the bag
that comes with the component.
5. When placing screws into the screw holes to secure the server board to the chassis, please do
not over-tighten the screws! Doing so may damage the server board.
2 Motherboard Layout
1 2 3
DDR4_G1 (64 bit, 288-pin module, Blue)
DDR4_G2 (64 bit, 288-pin module,
DDR4_G3 (64 bit, 288-pin module, White)
DDR4_H1 (64 bit, 288-pin module,
DDR4_H2 (64 bit, 288-pin module, White)
USB 2.0
T: USB1
DDR4_H3 (64 bit, 288-pin module,
B: USB2
USB 3.0
IPMI
T: USB1
LAN
B: USB2
62
LAN1 LAN2
61
LAN3 LAN4
REAR_FAN1
UID1
60
CPU2_FAN1
DDR4_F3 (64 bit, 288-pin module, White)
59
DDR4_F2 (64 bit, 288-pin module,
58
DDR4_F1 (64 bit, 288-pin module, Blue)
DDR4_E3 (64 bit, 288-pin module,
57
DDR4_E2 (64 bit, 288-pin module, White)
DDR4_E1 (64 bit, 288-pin module,
RoHS
NUT4 NUT3 NUT2 NUT1
EP2C612D24-4L
PCIE3
(Blue)
56
PCIE2
(Blue)
PCIE1
(Blue)
55
CHASSIS_ID3
CHASSIS_ID2
54 CHASSIS_ID1
BMC 1
BIOS BMC_SMB_1
F/W BMC_SMB_2 BMC_SMB_3
1 PECI1
64Mb
1
1
53 52 51 50 49
3 I/O Panel
2
1 3
No. Description No. Description
1 Serial Port (COM1)
2 VGA Port (VGA1)
3 USB 2.0 Ports (USB_1_2)
4 USB 3.0 Ports (USB3_1_2)
5 LAN RJ-45 Port (IPMI_LAN) 10
*For EP2C612D24-4L only
33.0cm (13.0 in)
White )
Blue )
White )
CPU2
White )
White )
Blue )
BAT1
Dr.
Debug
BUZZER1
Intel
C612
USB3_3_4
T 1 R
SPEAKER1
1 1 1
1
48 47 46 45 44
5 7 9
4 6 8 10
6 LAN RJ-45 Port (LAN1)
7 LAN RJ-45 Port (LAN2)
8 LAN RJ-45 Port (LAN3)*
9 LAN RJ-45 Port (LAN4)*
UID Switch (UID)
1 Install the Server Board
1
Insert the server board into the chassis.
2
A f f i x t he screws clock w ise into t he
mounting holes in all of the corners of
the server board.
Do not over-tighten the screws
5 7
4 6
1
ATXPWR1
FRNT_FAN2 FRNT_FAN1
ATX12V2 ATX12V1
1
IPMB1
PMBUS_SEL_ALT1
PMBUS_SEL_DAT1
PMBUS_SEL_CLK1
DDR4_A1 (64 bit, 288-pin module, Blue)
DDR4_A2 (64 bit, 288-pin module, White )
DDR4_A3 (64 bit, 288-pin module, White)
DDR4_B1 (64 bit, 288-pin module, Blue )
DDR4_B2 (64 bit, 288-pin module, White)
DDR4_B3 (64 bit, 288-pin module, White )
CPU1
DDR4_D3 (64 bit, 288-pin module, White)
DDR4_D2 (64 bit, 288-pin module, White )
DDR4_D1 (64 bit, 288-pin module, Blue)
DDR4_C3 (64 bit, 288-pin module, White )
DDR4_C2 (64 bit, 288-pin module, White)
DDR4_C1 (64 bit, 288-pin module, Blue )
FRNT_FAN4
FRNT_FAN5
LED_LAN3_4 PANEL1
SATA_4 SATA_0
1 1
1
1
USB_3_4 SATA_1
SATA_5
1
SSATA_2 SSATA_0 SATA_2
USB3_5
1
ME_RECOVERY1
1
1
TPM1 SSATA_1
SSATA_3 SATA_3 1
43 42 41 40 39 38 37 36 35 34 33 32
4 Headers
System Panel Header Auxiliary Panel Header
PLED+
PLED-
PWRBTN#
GND
1
GND
RESET# 1
GND
HDLED-
HDLED+
5 Jumper Cap On/Off
No. Description
1 2 x 288-pin DDR4 DIMM Slots (DDR4_H3, DDR4_G3, White)
8
2 2 x 288-pin DDR4 DIMM Slots (DDR4_H2, DDR4_G2, White)
3 2 x 288-pin DDR4 DIMM Slots (DDR4_H1, DDR4_G1, Blue)
4 ATX 12V Power Connector (ATX12V2)
PSU_SMB1
5 Intelligent Platform Management Bus header (IPMB1)
6 ATX Power Connector (ATXPWR1)
9
10
7 ATX 12V Power Connector (ATX12V1)
11
1 1
8 PSU SMBus (PSU_SMB1)
12
1 1
13
9 Front Fan Connector (FRNT_FAN1)
1 1
10 Front Fan Connector (FRNT_FAN2)
11 PMBUS Mode Jumper (PMBUS_SEL_ALT1)
14
12 PMBUS Mode Jumper (PMBUS_SEL_DAT1)
13 PMBUS Mode Jumper (PMBUS_SEL_CLK1)
15
14 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1, Blue)
15 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2, White)
16
16 2 x 288-pin DDR4 DIMM Slots (DDR4_A3, DDR4_B3, White)
17 CPU 1 Fan Connector (CPU1_FAN1)
18 LGA 2011 R3 CPU Socket 1 (CPU1)
19 2 x 288-pin DDR4 DIMM Slots (DDR4_C3, DDR4_D3, White)
17
CPU1_FAN1
20 2 x 288-pin DDR4 DIMM Slots (DDR4_C2, DDR4_D2, White)
21 2 x 288-pin DDR4 DIMM Slots (DDR4_C1, DDR4_D1, Blue)
18
22 Front Fan Connector (FRNT_FAN4)
23 Front Fan Connector (FRNT_FAN3)
24 Front Fan Connector (FRNT_FAN5)
25 Lan LED Connector (LED_LAN34)
26 System Panel Header (PANEL1)
27 Auxiliary Panel Header (AUX_PANEL1)
28 SSATA SGPIO Connector (SSATA_SGPIO1)
29 Non Maskable Interrupt Button (NMI_BTN1)
19
30 SATA SGPIO Connector (SATA_SGPIO2)
20
31 SATA SGPIO Connector (SATA_SGPIO1)
32 SATA3 Connector (SATA_0)
33 SATA3 Connector (SATA_2)
21
34 SATA3 Connector (SATA_3)
35 SATA3 Connector (SATA_1)
22
36 SSATA3 Connector (SSATA_0)
23
37 SSATA3 Connector (SSATA_1)
FRNT_FAN3
24
38 SATA3 Connector (SATA_5)
25
PLED PWRBTN
26
39 SSATA3 Connector (SSATA_3)
1
HDLED RESET
27
40 SSATA3 Connector (SSATA_2)
AUX_PANEL1
28
SSATA_SGPIO1 41 SATA3 Connector (SATA_4)
29
1
NMI_BTN1
42 TPM Header (TPM1)
30
SATA_SGPIO2
43 ME Recovery Jumper (ME_RECOVERY1)
31
SATA_SGPIO1
44 Thermal Sensor Header (TR1)
45 Vertical Type A USB 3.0 (USB3_5)
46 Buzzer (BUZZER1)
47 USB 3.0 Header (USB3_3_4)
48 Speaker Header (SPEAKER1)
49 CPU PECI Mode Jumper (PECI1)
50 Chassis ID3 Jumper (CHASSIS_ID3)
51 BMC SMBus Header (BMC_SMB_3)
52 BMC SMBus Header (BMC_SMB_2)
53 BMC SMBus Header (BMC_SMB_1)
A B
54 Chassis ID2 Jumper (CHASSIS_ID2)
55 Chassis ID1 Jumper (CHASSIS_ID1)
56 USB 2.0 Header (USB_3_4)
57 2 x 288-pin DDR4 DIMM Slots (DDR4_E1, DDR4_F1, Blue)
58 2 x 288-pin DDR4 DIMM Slots (DDR4_E2, DDR4_F2, White)
59 2 x 288-pin DDR4 DIMM Slots (DDR4_E3, DDR4_F3, White)
60 CPU 2 Fan Connector (CPU2_FAN1)
61 Rear Fan Connector (REAR_FAN1)
62 LGA 2011 R3 CPU Socket 2 (CPU2)
C E
D
When the jumper cap is placed on the pins, the jumper is "Short".
If no jumper cap is placed on the pins, the jumper is "Open".
The illustration shows a 3-pin jumper whose pin1 and pin2 are
"Short" when a jumper cap is placed on these 2 pins.
www.asrockrack.com
*For EP2C612D24-4L only