Configuring Chipset Registers; Setting The Boot Options - Epson ActionDesk 4000 User Manual

Configuring chipset registers

The system can automatically set your Advanced
Control
values in the chipset registers and optimize your system's
performance. getting these values correctly increases your
system performance; however, setting these values incorrectly
may cause your system to malfunction or shut down. Be sure to
Auto Configuration
set the
the system automatically configure these options to avoid
problems.

Setting the Boot Options

When you select Boot Options from the Main Menu, you
see the Boot Options screen. Options on this screen allow you
to define the boot sequence and determine what information
you see when you start your system.
The Disk
order in which the computer checks the drives for an operating
system when you turn it on or reset it. The following table
describes the available options.
Disk drive boot
select
A: then C:
C: than A:
c: only
Running SETUP and Installing Drivers
2-8
options or you can manually set them to change the
drive boot sequence
sequence options
TO
Load operating system from drive A. If it isn't
there, loads it from drive C.
Load operating system from drive C. if it isn't
there, loads it from drive A.
Load operating system from drive C.
I
Enabled to
option to
optiondetermines the
Chipset
let
I
I