Connecting A Mouse; Connecting A Monitor - Epson ActionDesk 4000 User Manual

Connecting a Mouse

If you have a PS/2 compatible mouse, connect it to the
computer's built-in mouse port by inserting the connector into
the port marked MOUSE.
caution
Although the
keyboard are physically identical, they cannot be used
interchangeably. Be sure to plug the mouse connector into
the MOUSE port, or you may damage your system.
If your system has not already been configured, you may need
to install a mouse driver. See your mouse manual for
instructions. (If you are using Windows, the Windows
installation program installed a mouse driver for Windows
applications.)

Connecting a Monitor

YOU Can connect your VGA or SVGA monitor to the computer's
built-in VGA port as described below.
1. Place your monitor on top of or near the computer. Turn the
monitor and computer around so the backs are facing you.
2. There should be two cables provided with your monitor: the
monitor cable (to
cable (to connect it to the power source). On most monitors,
the monitor cable is permanently attached to the monitor. If
your monitor does not have an attached cable, connect the
cable to it now.
3. Examine the connector on the monitor cable and line it up
with the VGA port
connector into the port.
1-4 Setting Up Your System
and ports for the mouse and
connectors
it to the computer) and the power
connect
on the
computer. Then insert the