Diskette Problems - Epson ActionDesk 4000 User Manual

Diskette Problems

You see a diskette error message.
Reinsert the diskette, making sure you insert it all the way. If
the drive has a latch, turn it down to secure the diskette.
Also, check to see that you have inserted the right type of
diskette in the drive. For example, make sure you are not
inserting a high-density diskette in a double-density drive.
If reinserting the diskette does not solve the problem, insert the
diskette in another diskette drive of the same type. If you can
read the diskette in a different drive, your drive may be faulty.
The diskette is the right type, but you still see an error.
Check that the diskette is not writeprotected, preventing the
drive from writing to the diskette.
Make sure the diskette is formatted. See your operating system
documentation for instructions on formatting diskettes.
The system may have the
SETUP enabled. If you entered a User level password when
you started the system, but this option is set to a Supervisor
level, you see an error when you access the drive.
You may have a defective diskette. Try copying the files from
the bad diskette to a new diskette.
Something is wrong with the data in the files.
If you are using MS-DOS, run CHKDSX to repair the files. You
may also be able to use special utilities or diagnostics to solve
this problem.
Diskette Access option in
Troubleshooting 6-7