Connecting The Mouse - Epson Equity 386/33 PLUS Setup Manual

3. You can change the angle of the keyboard by adjusting the
legs on the bottom. Turn it over and flip each leg upward
until it locks into place, as shown below.

Connecting the Mouse

6
Your computer has an auxiliary port for an IBM PS/2
compatible mouse that uses a round, miniature DIN (6-pin)
connector. If your mouse has this type of connector, you can
connect it to the built-in port on your computer. If your mouse
requires a different interface port, you can connect it to the
built-in serial port or install an option card to provide the
interface.
To connect a mouse to the built-in mouse port, make sure your
computer is turned off. Then plug the connector into the port
marked with a mouse icon, as shown in the following
illustration.
Setting Up System
Your
1-13