Chapter 2: Removing And Installing Components; Recommended Tools; Screw List - Dell Latitude 5430 Chromebook Service Manual

Removing and installing components
NOTE: The images in this document may differ from your computer depending on the configuration you ordered.

Recommended tools

The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Phillips screwdriver #1
● Plastic scribe

Screw list

NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE: Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Base cover
Battery
Fan
M.2 solid-state drive thermal
bracket
M.2 solid-state drive
Left type-C bracket
Right type-C bracket
Power-button board
Volume-control board
Screw type
Captive
M2x3
M2.5x4
M2x2
M2x2
M2x4
M2x4
M1.6x1.5
M1.6x1.5
Quantity
7
5
2
2
1
2
2
1
2
Removing and installing components
Screw image
2
9