2. Remove the
SIM
card.
3. Remove the
SD
card.
4. Remove the
base
cover.
5. Remove the battery.
About this task
The following image indicates the location of the battery cable and provides a visual representation of the removal procedure.
Steps
1. Unroute the battery cable from the routing guides on the battery.
2. Disconnect the battery cable from the connector on the battery.
3. Lift the battery cable away from the battery.
Installing the battery cable
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the battery cable and provides a visual representation of the installation procedure.
Removing and installing components
23