Steps
1. Align the screw holes on the battery with the screw holes on the palm-rest and keyboard assembly.
2. Replace the five screws (M2x3) that secure the battery to the palm-rest and keyboard assembly.
3. Connect the battery cable to the connector on the system board.
Next steps
1. Install the
base
cover.
2. Install the
SD
card.
3. Install the
SIM
card.
4. Follow the procedure in
Battery cable
Removing the battery cable
Prerequisites
1. Follow the procedure in
22
Removing and installing components
After working inside your
Before working inside your
computer.
computer.