2. Align the notch on the wireless card with the tab on the wireless-card slot on the system board.
3. Slide and insert the wireless card at an angle into the wireless-card slot on the system board.
4. Place the wireless-card bracket on the wireless card.
5. Replace the screw (M2x3) to secure the wireless card and wireless-card bracket to the system board.
Next steps
1. Install the
SD
card.
2. Install the
SIM
card.
3. Install the
base
cover.
4. Follow the procedure in
Wireless Wide Area Network (WWAN) card
Removing the WWAN card
Prerequisites
1. Follow the procedure in
2. Remove the
SIM
card.
3. Remove the
SD
card.
4. Remove the
base
cover.
About this task
NOTE:
The following steps are applicable only for computers that are shipped with a WWAN card.
The following image indicates the location of the WWAN card and provides a visual representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
29