Heatsink; Removing The Heat Sink - Dell Latitude 5430 Chromebook Service Manual

Steps
1. Align the screw holes on the fan with the screw holes on the palm-rest and keyboard assembly.
2. Replace the two screws (M2.5x4) that secure the fan to the palm-rest and keyboard assembly.
3. Connect the fan cable to the connector on the system board.
Next steps
1. Install the base cover.
2. Follow the procedure in

HeatSink

Removing the heat sink

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
About this task
CAUTION: The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool
before you touch it.
NOTE: For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your skin
can reduce the heat transfer capability of the thermal grease.
The following image(s) indicate the location of the heat sink and provides a visual representation of the removal procedure.
42 Removing and installing components
After working inside your
Before working inside your
computer.
computer.