About this task
The following image indicates the location of the volume-control board and provides a visual representation of the installation
procedure.
Steps
1. Using the alignment posts, replace the volume control board into the slots on the palm-rest and keyboard assembly.
2. Replace the two screws (M1.6x1.5) that secure the volume control board to the palm-rest and keyboard assembly.
3. Connect the volume-control cable to the connector on the volume-control board and close the latch.
4. Connect the volume control cable to the connector on the system board.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
Power-button board
Removing the power-button board
The power-button board is available in Latitude 5430 Chromebook 2-in-1 configurations only.
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
About this task
The following image indicates the location of the power-button board and provides a visual representation of the removal
procedure.
38
Removing and installing components
after working inside your
before working inside your
computer.
computer.