Cleaning The Air Intake Filters - Epson PowerLite 8300NL User Manual

note
When you get a replacement
lamp for your projector, new
air filters are included. You
should replace the filters
when you replace the lamp.
Maintaining the Projector
92

Cleaning the Air Intake Filters

To clean the air intake filters, follow these steps:
1. Turn off the projector and unplug the power cord.
2. Use a computer vacuum to clean the filters. If you don't have one,
gently clean the filters with a soft brush, such as an artist's
paintbrush.
3. If the dirt is difficult to remove or a filter is broken, replace the
filters as described in the next section. Contact your dealer or call
EPSON at (800) 873-7766 in the United States to obtain new
ones. In Canada, please call (800) 463-7766 for dealer referral.
Replacing the Filters
1. Turn the projector over (unless it's ceiling-mounted).
2. Remove the filters by sliding them out to the sides.