note
The
setting
Brightness
changes the opacity of the
projector's LCD panels.
You can also adjust the
brightness of the lamp itself.
Select
Brightness Control
in the Advanced2 menu,
then choose
or
High
Low
(the default setting is
High
Selecting the low brightness
setting extends the life of the
lamp (see page 94).
Fine-tuning the Projector
64
Adjusting the Image Quality
You can use the Video menu to adjust the brightness, sharpness, and
contrast. If you're projecting from a computer (but not through the
DVI port), there are additional adjustments you can make (see
page 65).
1. Press the
Menu
menu.
Video
You see the Video menu screen (the actual settings may vary,
depending on the selected input source).
2. Use the
adjust it as needed:
Brightness
Lightens or darkens the overall image.
Contrast
Adjusts the difference between light and dark areas. If you're
projecting from a computer, select
adjust the contrast automatically; or select
press
Enter
).
Sharpness
Adjusts the sharpness of the image.
button on the remote control, then enter the
pointer button to highlight the desired option, then
to adjust the setting yourself.
to let the projector
Auto
and then
Manual