Connecting a Composite Video Source
1. Locate an RCA video cable (one is usually provided with your
video equipment).
2. Connect the cable to the yellow video output connector on your
player and the yellow
3. If you want to play sound through the projector, see page 29 for
instructions on connecting an audio cable.
4. If you don't need to make any other connections, see Chapter 2
for instructions on turning on the projector and adjusting the
image. Once the projector is turned on, be sure to select
the source to see your image (see page 34).
connector on the projector:
Video
as
Video
Setting Up the Projector
17