Technical Data; Operating Conditions; Mechanical Data; Electrical Data - Grundfos MULTILIFT MD1 Installation And Operating Instructions Manual

Hide thumbs Also See for MULTILIFT MD1:
Table of Contents

Advertisement

11. Technical data

11.1 Operating conditions

Controller
Ambient temperature
during operation [°C]
Pump
Ambient temperature [°C]
Liquid temperature [°C]
pH value
Maximum density [kg/m³] 1100
Sound pressure level
Related information
2.3 Pumped liquids
4.1 Location

11.2 Mechanical data

Control cabinet
Ambient temperature in
stock [°C]
Height × width × depth
[mm]
Weight
Enclosure class

11.3 Electrical data

Power supply
Supply voltage [V]
Voltage tolerances
Frequency [Hz]
Supply system earthing
Backup fuse
22
0-40
SE: -20 to +40
SL: -20 to +30
0-40
For short periods up to
60
4-10
Less than 70 dB (A)
-30 to +60
Direct-on-line starting:
215 × 280 × 115
Star-delta starting: 600 ×
600 × 210
See the controller
nameplate.
Direct-on-line starting:
IP54
Star-delta starting: IP54
3 × 380-415, PE
3 × 220-240, PE
-10 % / +6 % of rated
voltage
50 or 60
TN system
See the controller
nameplate.

12. Disposing of the product

This product or parts of it must be disposed of in an
environmentally sound way.
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest
Grundfos company or service workshop.
The crossed-out wheelie bin
symbol on a product means
that it must be disposed of
separately from household
waste. When a product
marked with this symbol
reaches its end of life, take it
to a collection point
designated by the local waste
disposal authorities. The
separate collection and
recycling of such products will
help protect the environment
and human health.
See also end-of-life information at
www.grundfos.com/product-recycling.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multilift mdv

Table of Contents