Endress+Hauser Levelflex FMP53 Operating Instructions Manual page 25

Levelflex FMP53 FOUNDATION Fieldbus
Endress+Hauser
Mounting at an angle
• For mechanical reasons, the probe should be installed as vertically as possible.
• If the probe is installed at an angle, the length of the probe must be reduced depending
on the angle of installation.
• α 5 °: LN 4 m (13.1 ft)
max.
• α 10 °: LN 2 m (6.6 ft)
max.
• α 30 °: LN 1 m (3.3 ft)
max.
Mounting
A0014145
25