Configuring The Local Display; Factory Setting Of Local Display For Level Measurements; Adjusting The Local Display - Endress+Hauser Levelflex FMP53 Operating Instructions Manual

Commissioning via operating menu
76
11.5

Configuring the local display

11.5.1

Factory setting of local display for level measurements

Parameter Factory setting for devices with 1 current
output
Format display 1 value, max. size
Value 1 display Level linearized
Value 2 display Distance
Value 3 display Current output 1
Value 4 display None
11.5.2

Adjusting the local display

The local display can be adjusted in the following submenu:
Setup → Advanced setup → Display
Levelflex FMP53 FOUNDATION Fieldbus
Factory setting for devices with 2 current
outputs
1 value, max. size
Level linearized
Distance
Current output 1
Current output 2
Endress+Hauser