KYMCO AGILITY300 Manual page 25

Ser vice Indicator Reset(noodoe model):
After you change the engine oil or
to reset the Service Indicator.
1. Push MODE button, the multifunction
display will change (ODO→Trip→Oil
repeatedly in sequence.
2. Choose Oil service mode
MODE button and ADJ button at the same
time for 2 seconds and the display will turn
to 0.0,the service indicator is reset.
3. The service indicator will be on again
when you reach next 3000km (oil service)
or 20000km(Belt service).
Ser vice Indicator Reset:
After you change the engine oil , you need to reset
the Service Indicator.
1. Push MODE button, the multifunction
display will change ODO→Trip→Empty display
( Service Mode )
2. Choose Oil service mode press MODE button
and ADJ button at the same time for 2 seconds
and the display will turn to 0.0,the service
indicator is reset.
CONTROLS & FEATURES
Belt , you need
→
or Belt press
repeatedly in sequence.
Belt )
NOTE
: When the Service indicator is on, the
ODO/Trip and mileage number will flash.
21