KYMCO AGILITY300 Manual page 41

Proper Riding Method
1.Keep the Rear Brake Lever in braking state and
push the vehicle forward, the Main Stand will
spring up automatically.
2.Boarding from the left side, sit upright; keep left
foot standing on the ground to prevent toppling;
adjust the Back Mirror to a proper angle.
3.Release Front and Rear Brake Levers.
4.Turn the Throttle Grip to adjust scooter speed.
Speed is controlled by adjusting the Throttle Grip.
Turn Speed increases.
Increase fuel (throttle) slowly
When taking off or riding on an up-slope,
slowly turn the Throttle Grip to increase
horsepower.
Return to original position
Speed decreases.
Be agile while returning the Throttle Grip
WARNING
After starting the engine, do not raise engine rpm
while not advancing the vehicle, or danger may
occur.
OPERATION
˙
Before advancing, keep the Rear Brake
Lever in braking state. DO NOT raise engine
rpm arbitrarily.
˙
Do not turn the Throttle Grip rapidly, or the
vehicle may dash out.
WARNING
37