KYMCO AGILITY300 Manual page 61

Coolant replacement
T h e c o o l a n t s h o u l d b e r e p l a c e d b y a n
authorized KYMCO dealer.
NOTE:
Always notice coolant level in the reserve
tank. Do not attempt to add coolant by removing the
radiator cap.
Coolant recommendation
Use the proper type and amount of coolant.
The coolant must be in good condition and have
the proper ratio of anti-freeze and distilled
water to prevent freezing, overheating, and
corrosion.
Use only high quality ethylene glycol anti-
freeze that contains corrosion protection
inhibitors and the formula is for aluminum alloy
engines.
(See the label on the container)
A 50:50 solution of anti-freeze and distilled
water is required. It's for most operating
temperature and also with good corrosion
protection.
MAINTENANCE
Use only low-mineral drinking water or distilled
●
water as a part of the anti-freeze solution.
Use tap-water will cause engine damage.
●
Use a higher concentration of anti-freeze in
●
freezing weather and be replaced by the
KYMCO dealer. This higher concentration of
antifreeze should not exceed 60%. When
becoming warm, change the anti-freeze ratio
back to the standard ratio.
A concentration of less than 40:60(40%
●
a n t i - f r e e z e ) w i l l n o t p r o v i d e p r o p e r
corrosion protection.
CAUTION
57