40
Factory reset
In reset selection, press and hold the O touch button until thermostat flashes "Fr",
indicating factory reset, and it is selected when the button is released.
The 'Fr' will flash on the matrix display to confirm the factory reset and the
thermostat resets to factory defaults and after 5 s it returns to
NOTE: To cancel the factory reset, press and hold the O button for > 30 s.
This reverts the thermostat's UI back to its previous state before the touch
button is pressed, with no change in a functional state.
> 30 s
A factory reset will:
•
Delete all Zigbee connection details.
•
Delete all configuration data.
•
Delete all schedules information.
•
Revert to the default setpoint in manual control.
•
Maintain all Factory settings e.g. MAC address.
Smart ZB Thermostat 16 A
preset, page
DUG_ZB Thermostat 16 A_ELKO-00
7.