Elko Smart ZB Thermostat 16 A User Manual page 36

Example of an automation
36
9. In the Add task menu, you can do either or all of the following options (F):
– Run the device - Select the devices that you want to be triggered.
– Moment or Automation - Select the moment which you want to trigger or
select the automation that you want to enable or disable.
– Send notification - Turn On notification for the automation.
– Delay - Set the delay time.
NOTE: You can add one or more actions using
Automation settings Automation settings
Cancel Cancel
My Automation
Any condition is met Any condition is met (0/10) (0/10)
Add Condition Add Condition
(Added 0/80)
Action
Add task
Add Task
All-Day
10. Tap on Effective period to set the time range for the automation. You can
select any one of the following (G) and tap Next:
– All-day - 24 hours.
– Daytime - From sunrise to sunset.
– Night - From sunset to sunrise.
– Custom - User defined time period.
11. Once all the actions and conditions are set, tap Save.
Once the automation is saved, it is visible on the Automation tab. You can
tap the toggle switch on the automation to enable it.
This demonstration shows you how to create an automation to turn on the
Thermostat setpoint to 20 °C when the outdoor temperature is less than 15 °C .
1. Go to Automation > + to create an automation.
2. Tap to enter the name of automation and tap Save.
TIP: You can choose the cover image that represents your automation by
tapping .
Save Save
DUG_ZB Thermostat 16 A_ELKO-00
Smart ZB Thermostat 16 A
.