Operator's Seat And Frame - Toyota 30-5SDK5 Operator's Manual

OPERATOR'S SEAT AND FRAME

(1)
(1) Seat slide lever
en-16
Operator's seat
Warning
Do not place your arms, head or body out-
side the operator guard.
The operator's seat and seat belt are provided
for your safety.
The seat can be moved back and forth for posi-
tion adjustment while the seat slide lever is
pulled upward.
Caution Caution
• To prevent accidents, make sure to check
the seat adjustment before driving.
• To prevent accidents, do not perform seat
adjustments while traveling.
• Adjust the seat position so that all of the
pedals can be properly depressed when
sitting in the operator's seat leaning
against the seat back.
• With the interlock system, if the operator
is not sitting down in the seat properly,
traveling and material handling opera-
tions cannot be performed. Perform each
operation sitting in the seat correctly.
Additionally, do not perform any opera-
tion when something is on the seat.
• After adjustment, lightly shake the seat
forward and backward to confirm that
the seat is firmly locked in position.
Note:
Do not turn ON the seat switch to perform oper-
ations when not sitting in the seat. If the seat
switch is turned OFF for 1 second when the
operation switch is turned ON, the material
handling pedals (lift, dump) will be locked and
the material handling operations will be inhib-
ited. At this point, if the operator sits down
again correctly, only the traveling operation will
be enabled. To restart the material handling
operation, turn ON the operation switch again.
(4)
(1) (3)
(1) Seat slide lever
(2) Recliner adjust lever
(3) Weight adjust knob
(4) Seat belt
Note:
Do not turn ON the seat switch to perform oper-
ations when not sitting in the seat. If the seat
switch is turned OFF for 1 second when the
operation switch is turned ON, the material
handling pedals (lift, dump) will be locked and
the material handling operations will be inhib-
ited. At this point, if the operator sits down
again correctly, only the traveling operation will
be enabled. To restart the material handling
operation, turn ON the operation switch again.
Suspension seat (Option)
Warning
• Do not place your arms, head or body
outside the operator guard.
• For vehicles with suspension seat specifi-
cations, if your feet are touching the front
edge of the seat, the seat switch may
determine this to mean that "the operator
is seated"
(2)
The seat suspension mechanism provides a
comfortable seating position according to the
weight of the driver. The optimum driving posi-
tion can be set using the knob and levers.
Seat slide lever
Lift the slide lever to adjust the back-and-forth
position of the seat. The seat is secured in posi-
tion when you release the lever.
Recliner adjust lever
Pull the lever on the left to adjust the seat's
angle of recline.
Weight adjust knob
Pull the adjust knob towards you and move it up
and down until the orange indicator is in the
center. Adjustment can be made for body
weights between 45 kg and 170 kg.
Caution Caution
• To prevent accidents, make sure to check
the seat adjustment before driving.
• To prevent accidents, do not perform seat
adjustments while traveling.
• Adjust the seat position so that all of the
pedals can be properly depressed when
sitting in the operator's seat leaning
against the seat back.
• With the interlock system, if the operator
is not sitting down in the seat properly,
traveling and material handling opera-
tions cannot be performed. Perform each
operation sitting in the seat correctly.
Additionally, do not perform any opera-
tion when something is on the seat.
• After adjustment, lightly shake the seat
forward and backward to confirm that
the seat is firmly locked in position.