Ejecting Paper; For Roll Paper; For Cut Sheet Media - Epson Stylus Pro 11880 User Manual

User's Guide
G
Set the paper lever to the secured position,
and then close the front cover.
BUTTON appears on the LCD
PRESS THE
panel.
H
Press the button.
The print heads move and the sheet feeds
into the printing position automatically.
I
If DO YOU WANT TO USE THE FOLLOWING
PAPER? appears on the LCD panel, press the
button to select the media, and then
press the button to set the media.
The previous setting appears on the LCD
panel. If the media type is correct, press the
button.

Ejecting Paper

This section explains how to eject paper after
printing.
Note:
When you use Auto Take-up Reel Unit, see the
following section.
"Using Auto Take-up Reel Unit" on page 41
When you use the paper basket, see the following
section.
"Using the paper basket" on page 46

For roll paper

See the following section to cut the roll paper.
"Cutting the roll paper" on page 33

For cut sheet media

A
When printing is complete, the printer
supports the printed media, and PAPER
OUT. LOAD PAPER is displayed on the LCD
panel.
If READY appears on the LCD panel, press
the button for 3 seconds to eject paper.
Caution:
c
Do not press any buttons when the
Power light or the Pause light is flashing.
Paper Handling 40