Epson Stylus Pro 11880 User Manual page 31

User's Guide
C
Aligning it with the rails on both sides,
slowly roll the paper roll into place and set
it on the mounting brackets inside the
printer.
D
Turn on the printer by pressing the
button.
E
Make sure that the Pause light is not
flashing, and then set the paper lever to the
released position.
The paper lever may be locked if REMAINING
PPR SETUP is set to ON: AT ROLL EXCHANGE.
In this case, press and hold the
for 3 seconds to print the barcode, so you
can release the paper lever.
F
Insert the paper into the insertion slot. Pull
the paper down through the paper
insertion slot so that it comes out below.
Taking care not to fold the edge of the
paper, insert it so that there is no slack.
G
Adjust the feed strength by pressing the
button.
button
Paper Handling 31