Epson Stylus Pro 11880 User Manual page 45

User's Guide
B
Reverse the flange so that the smaller knob
is positioned on the outside, then replace it
on the drive unit by pinching the knob.
C
Remove the flange by pinching the knob.
D
Reverse the flange so that the smaller knob
is positioned on the outside, then replace it
on the movable unit by pinching the knob.
Installing a take-up reel core
A
Make sure that the lock lever is released
(turned to the left). Slide the movable unit
to the left end of the horizontal strut.
B
Slip one end of the take-up reel core over
the flanged knob on the drive unit.
C
Insert the flanged knob on the movable unit
into the other end of the take-up reel core.
Paper Handling 45