Maintenance; Daily Maintenance; Instructions For Placing The Printer; Notes For When You Are Not Using The Printer - Epson Stylus Pro 11880 User Manual

User's Guide

Maintenance

Daily Maintenance

Instructions for placing the
printer
Observe the following when setting up the
printer:
❏ Choose a flat and stable location that can
support the printer weight (about 150.5 kg).
❏ Use only an outlet that meets the power
requirements of this printer.
❏ Leave enough room for easy operation,
maintenance, and ventilation.
See "Choosing a Place for a Printer" in the
Unpacking and Setup Guide.
❏ Operate the printer under the following
conditions (temperature is 10 to 35°C and
humidity is 20 to 80%).
Even when the conditions above are met, you
may not print properly if the environmental
conditions are not proper for the paper. Be sure to
use the printer where the paper conditions are
met. See the handling instructions of the paper for
more detailed information. Keep the printer away
from drying, direct sunlight, or heat sources to
maintain the appropriate humidity.
Notes for when you are not
using the printer
The print head nozzles are very small, thus, they
2007/03/07 17:39:571
can become clogged easily if dust gets on the print
head. To avoid this, close the roll paper cover or
the front cover when you are not using the
printer. If you are not using the printer for a long
time, put a non-static cloth on the printer to avoid
getting dust on the printer.

Instructions for using paper

Notes for handling paper
See the instructions below and the handling
instructions of the paper for more details.
❏ Use Epson special media under the following
conditions (temperature is 15 to 25°C and
humidity is 40 to 60%).
❏ Do not bend the paper or scratch on the
surface of the paper.
❏ Keep fingers off the printable surface of the
media, as fingerprints may reduce the print
quality.
❏ Set the roll paper by handling the edges of the
roll paper. Whenever possible, use gloves to
handle media.
❏ The paper may bend if the temperature and
humidity will change rapidly. Be careful not
to bend or soil the paper, and flatten it before
setting it in the printer.
❏ Do not lose the paper package so you can use
it for storing the paper.
Maintenance 120