Table of Contents
Advertisement
Figure 44 Removing a Contivity 4600 power supply
3
Grab the handle and pull the power supply firmly, until the device disengages.
Be careful of the sharp sheet-metal edges.
4
Insert the new power supply. Make sure it seats firmly in its socket and is
locked in. Be sure the green power LED on the front of the power supply is
on.
5
Secure the power supply screws tightly with a screwdriver.
6
Replace the front bezel.
Installing Hardware Options for the Contivity Secure IP Services Gateway
Chapter 7 Contivity 4600 option installation 101
CS460010A
Advertisement
Table of Contents
