64 Chapter 4 Contivity 1740 option installation
5
If you are replacing a DIMM, remove the installed DIMM as follows:
a
b Pull the DIMM up to remove it from the slot.
6
Press down the locking lever on either side of the slot where you plan to
install the new DIMM
7
Place the new or replacement DIMM in the slot
Use the alignment keys to properly position the DIMM in the slot.
8
Press the DIMM firmly into the socket.
9
Pull up the locking lever on either side of the DIMM to snap it into position.
Figure 24 Installing and removing a DIMM
Alignment keys
302283-K Rev 00
Press down the locking lever on either side of the DIMM
(Figure
To remove DIMMs, pull back
locking levers and pull out DIMM.
To install DIMMs, pull back locking
levers and push in DIMM.
24).
(Figure
(Figure
24).
24).
Locking lever
CS260019A