Table of Contents
Advertisement
Installing and replacing option cards
The Contivity 2700 and 2600 have four slots for option cards (see
page
gateway or, if necessary, replacing an existing card.
Table 5
Table 5 Supported option cards for the Contivity 2700
Option card
Contivity Security Accelerator (CSA)
Hardware Accelerator
10/100 Ethernet interface
1000BASE-T interface (copper)
1000BASE-SX interface (fiber)
ADSL WAN interface
ISDN BRI S/T or U interface
T1/E1 CSU/DSU WAN interface
Quad T1/E1 CSU/DSU WAN interface
V.90 modem interface
Single V.35/X.21 WAN interface
Dual V.35 WAN interface
HSSI WAN interface
1 The Contivity 2700 must be running Version 4.90 or later.
2 To support two Hardware Accelerator cards, the gateway must be running Version 4.76 or later.
3 The Contivity 2700 must be running Version 4.80 or later.
4 This option card is no longer available for purchase.
Chapter 5 Contivity 2700 and 2600 option installation 73
71). This section provides instructions on adding new option cards to the
lists the option cards that you can install in the Contivity 2700.
1
3
3
4
Installing Hardware Options for the Contivity Secure IP Services Gateway
Maximum
number
1
2
2
2
4
2
1
1
2
4
4
4
1
3
4
4
4
2
Figure 27 on
Restrictions
Install two cards of either type, or
one card of each type. Do not
install either card in slot 4.
Install two 1000BASE-T cards, two
1000BASE-SX cards, or one card
of each type.
Do not install in slot 4 (preferred
slots are slots 1 and 3).
Advertisement
Table of Contents
