Table of Contents
Advertisement
To replace a fan tray:
1
Shut down the Contivity 5000 using the Web GUI or the command line
interface and then unplug it as described in
or replace hardware" on page
Danger: Turn off the Contivity 5000 and unplug it before you attempt
to replace a fan tray.
2
Remove the front bezel from the chassis, then remove the chassis from the
equipment rack (see
3
Remove the top cover from the chassis (see
cover" on page
108).
4
Attach the antistatic wrist strap that was shipped with the Contivity 5000 (see
"Attaching the antistatic wrist strap" on page
5
Locate the connectors on the system board where the two fan plugs for the fan
tray are attached
Figure 60 Removing a fan tray
Rear chassis
fans
Rear chassis
fan connectors
Installing Hardware Options for the Contivity Secure IP Services Gateway
Chapter 8 Contivity 5000 option installation 127
107.
"Removing the front bezel and top cover" on page
(Figure
60).
Front chassis
1
2
6 4 /1
3
0 0
4
5
3 2 /3
3
6
6 4 /1
3 3
"Shutting down the system to add
"Removing the front bezel and top
112).
fans
Front chassis
fan connectors
108).
11049FA
Advertisement
Table of Contents
