Electrical Installation - Parker Parflange 170 WCM Manual

Parflange 170 ECO/ WCM

5.3 Electrical installation

Before the machine is connected to the electrical supply, a check should be made that the
voltage and frequency details on the machine correspond to your electrical supply. (See
chapter 2.2, Technical Data). Changes and adaptations to electrical connections may be
carried out only by qualified personnel.
Direction of rotation:
The machine is set up in our factory for clockwise
rotation of the spindle.
In the event of incorrect rotation:
Pull out the power plug and with a screwdriver
turn the phase changer in the power plug by 180°.
Direction of
rotation
54
54
Viewing direction
Parflange 170/Manual