Operator's Working Position; Safety Advice Throughout The Life Of The Machine; Setting And Installation; Safety Measures During Normal Operation - Parker Parflange 170 WCM Manual

Parflange 170 ECO/ WCM

2.1.9 Operator's working position

In normal working mode the operator's working position is immediately in front of the ma-
chine. The controls are arranged so that he can operate them from this position.
No special working positions are provided for installation or maintenance.

2.2 Safety advice throughout the life of the machine

2.2.1 Setting and installation

The machine may be moved and set up only by a means of transportation suitable for the
weight of the machine. The machine must be located on an area suitable for the weight of
the machine and its tooling. A secure position must be provided for the machine when it is
set up. The machine may be operated only by personnel trained and authorised for the
purpose, who are familiar with the Operating Manual and can work accordingly.

2.2.2 Safety measures during normal operation

The machine should be operated only if all the protective equipment is fully functional. Be-
fore switching the machine on, ensure that nobody can be endangered by the machine or
by any movement of the tubing being formed. The machine should be checked regularly
for externally visible damage and for the functionality of the safety equipment. The switch
box must remain closed and may not be used as a storage space. Do not open the switch
box unless the mains power plug is disconnected. Unplug the mains power plug before
opening the device. Long or large tubes should be supported by trestles to ensure they
can be safely supported during the pre-assembly.

2.2.3 Maintenance and servicing, elimination of faults (see chapter 5)

Carry out on a regular basis the adjustments, servicing and maintenance stipulated. After
completing any maintenance work and before switching on again, check the functionality
of the safety equipment.
44
44
Parflange 170/Manual