Table of Contents
Advertisement
FUNCTIONS OF EACH PART
- Replacement of Fuse (for high current)
WARNING
For fire prevention
- Do not use a fuse with capacity different
from the one for the attached fuse (for
high current). Also, do not use a wire or
wrapping foil in the place of the fuse
(for high current). If used, it will cause a
overheating of the wire.
(1) Remove the battery (-) terminal.
(2) If the fuse (for high current) shows as the x
marked on the right side of the below
drawing, the fuse is burnt out. Replace with a
spare fuse (for high current).
NOTE
- If the fuse burnt out, request a check to the
dealer.
- When opening the fuse box at upper part of
the starter motor, pull out the front side lock
to open.
MN00029_A
16
Advertisement
Table of Contents
